ISO 13617 pdf download.Ships and marine technology — Shipboard incinerators — Requirements
1 Scope
This International Standard covers the design, manufacture, performance, operation, functioning and testing of incinerators intended to incinerate garbage and other shipboard wastes generated during the ship’s normal service (i.e. maintenance, operational, domestic and cargo associated wastes). This International Standard applies to incinerator plants with capacities up to 1 500 kW per unit. This International Standard does not apply to systems on special incinerator ships, e.g. for burning industrial wastes such as chemicals, manufacturing residues, etc. It does not address the electrical supply to the unit, nor the foundation connections and stack connections. This International Standard provides emission requirements in annex A, and fire protection requirements in annex B. Provisions for incinerators integrated with heat recovery units and provisions for flue gas temperatures are given in informative annex C and normative annex D, respectively. This International Standard may involve hazardous materials, operations, and equipment. It does not purport to address all of the safety problems associated with its use. It is the responsibility of the user of this International Standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
2 Normative references
The following normative documents contain provisions which, through reference in this text, constitute provisions of this International Standard. For dated references, subsequent amendments to, or revisions of, any of these publications do not apply. However, parties to agreements based on this International Standard are encouraged to investigate the possibility of applying the most recent editions of the normative documents indicated below. For undated references, the latest edition of the normative document referred to applies. Members of ISO and IEC maintain registers of currently valid International Standards.International Maritime Organization, International Convention on the Safety of Life at Sea, 1997 (SOLAS), Chapter II-2, Regulations 3, 26, and 44. International Maritime Organization, International Convention for the Prevention of Pollution from Ships, 1973, as modified by the Protocol of 1978 relating thereto (MARPOL 73/78). IEC 92, Electrical installations in ships IEC 60092-201:1980, Electrical installations in ships — Part 201: System design — General IEC 60092-202:1994, Electrical installations in ships — Part 202: System design — Protection IEC 60092-301:1980, Electrical installations in ships — Part 301: Equipment — Generators and motors
3 Terms and definitions
For the purposes of this International Standard, the following terms and definitions apply. 3.1 cargo-associated waste all materials which have become wastes as a result of use on board a ship for cargo stowage and handling, including, but not limited to, dunnage, shoring pallets, lining and packing materials, plywood, paper, cardboard, wire, and steel strapping 3.2 cargo residues remnants of any cargo material on board that cannot be placed in proper cargo holds (loading excess and spillage) or which remains in cargo holds and elsewhere after unloading procedures are completed (unloading residual and spillage) 3.3 contaminated rags rags that have been saturated with a substance defined as a harmful substance in certain annexes to MARPOL 73/78 3.4 domestic waste all types of food wastes, sewage and wastes generated in the living spaces on board the ship 3.5 fishing gear any physical device or part thereof or combination of items that may be placed on or in the water with the intended purpose of capturing, or controlling for subsequent capture, living marine or freshwater organisms 3.6 food wastes any spoiled or unspoiled victual substances, such as fruits, vegetables, dairy products, poultry, meat products, food scraps, food particles, and all other materials contaminated by such wastes, generated aboard ship, principally in the galley and dining areas 3.7 garbage all kinds of victual, domestic and operational waste excluding fresh fish and parts thereof, generated during the normal operation of the ship and liable to be disposed of continuously or periodically, except those substances which are defined or listed in certain annexes to MARPOL 73/78 3.8 incinerators shipboard facilities for incinerating solid wastes approximating in composition to household waste and liquid wastes arising from the operation of the ship, e.g., domestic waste, cargo-associated waste, maintenance waste, operational waste, cargo residues, and fishing gear, etc.