ISO 15702 pdf download

ISO 15702 pdf download.Leather — Tests for colour fastness — Colour fastness to machine washing 1 Scope This International Standard specifies a method for determining the resistance of leather to washing in a washing machine under specified conditions. The method is suitable for assessing the change in colour of the leather, the staining of an adjacent textile fabric and any change in the finish of the leather. This method can also be used in leather preparation for assessing the change in any other physical or chemical property during machine washing. 2 Normative references The following standards contain provisions which, through reference in this text, constitute provisions of this International Standard. At the time of publication, the editions indicated were valid. All standards are subject to revision, and parties to agreements based on this International Standard are encouraged to investigate the possibility of applying the most recent editions of the standard indicated below. Members of IEC and ISO maintain registers of currently valid International Standards. ISO 1 05-A01 :1 994, Textiles — Tests for colour fastness — Part A01 : General principles of testing. ISO 1 05-A02:1 993, Textiles — Tests for colour fastness — Part A02: Grey scale for assessing change in colour. ISO 1 05-A03:1 993, Textiles — Tests for colour fastness — Part A03: Grey scale for assessing staining. ISO 1 05-A04:1 989, Textiles — Tests for colour fastness — Part A04: Method for the instrumental assessment of the degree of staining of adjacent fabrics. 3 Principle A composite specimen of the leather and an adjacent textile fabric is agitated together with PTFE rods in washing liquor, rinsed and then squeezed and dried. The change in colour of the specimen and the adjacent textile fabric are assessed with the standard grey scale and, if applicable, any changes in the finish are noted. The general colour fastness testing principles used are in accordance with those described in ISO 1 05-A01 , taking into account the differences between textile substrates and leather. 4 Apparatus and materials Ordinary laboratory apparatus and 4.1 Test apparatus 1 ) , consisting of a rotating drum of capacity approximately 500 ml made typically of glass or stainless steel and sealed with solvent-resistant rubber gaskets. 4.2 PTFE rods 2) , 20 mm ± 2 mm long, 7 mm to 9 mm in diameter. 4.3 Plain-weave fabric, measuring 1 00 mm x 36 mm, for use as...